Article reposted from March 7 2018 link here

Learn more about autothermal pyrolysis here

Autothermal pyrolysis is the Bioeconomy Institute’s latest development in thermal deconstruction of biomass into biofuels and biochemicals. BEI is developing the basic technology and is working to demonstrate it on a commercial scale.

In autothermal pyrolysis, only air is used as the fluidizing gas. As a result, the energy for pyrolysis is provided through partial oxidation of pyrolysis products within the reactor. By eliminating the heat transfer bottleneck of conventional pyrolysis, several-fold process intensification is achieved.

[IMAGE]BEI autothermal pyrolysis system

Autothermal pyrolysis has three advantages:

  1. Simplified reactor design. Air-blown operation removes the need for external thermal energy and gas recycle, allowing the design to be easily scaled up.
  2. Process intensification, which has the goal of increasing outputs of desired products with fewer inputs of chemicals, water, energy, labor, and/or capital and fewer outputs of wastes and pollutants. With autothermal pyrolysis, biomass feed rate can be several fold higher than for conventional pyrolysis. Process intensification of pyrolysis makes possible the construction of smaller, modular systems suitable for distributed processing of dispersed biomass feedstocks.
  3. Reduced capital costs of more than 25 percent, according to technoeconomic analysis.

Engineers developing tools to understand, scale up autothermal production of bio-oil

Posted Mar 7, 2018 11:49 am

AMES, Iowa – On a whim, Iowa State University’s Robert C. Brown asked students to crank up the oxygen.

Brown and the engineers in his research group had worked for years to develop a thermochemical process called fast pyrolysis to produce biorenewable products. The process uses heat in the absence of oxygen to break down corn stalks, wood chips and other biomass to produce a liquid bio-oil for energy and a biochar for fertilizer.

The engineers had explored adding a little oxygen to the reactor. Brown suggested adding more and more. And that started to change everything. Now, rather than trying to improve pyrolysis by pushing more heat from outside the reactor, the engineers discovered burning a small amount of biomass inside the reactor could more efficiently provide the energy to drive pyrolysis.

Importantly, this partial combustion didn’t hurt the yield of bio-oil, said Brown, the director of Iowa State’s Bioeconomy Institute, an Anson Marston Distinguished Professor in Engineering and the Gary and Donna Hoover Chair in Mechanical Engineering.

Iowa State engineers call this process “autothermal pyrolysis.” The Iowa State University Research Foundation has applied for patent protection on the technology and has licensed it to Easy Energy Systems of Mankato, Minnesota, for commercial use.

Hitting the throttle

Others have experimented with adding oxygen to their pyrolyzers, but Brown said a review of the scientific literature didn’t find much success. In many cases, researchers dramatically reduced their yields of bio-oil.

As the Iowa State engineers continued to study autothermal pyrolysis, graduate student Joseph Polin decided to substitute inexpensive air for the pure oxygen used in earlier tests.

Polin found that to keep air-fuel ratios similar to the experiments with pure oxygen, he needed to feed biomass into the reactor five times faster. Brown was initially skeptical the reactor was big enough to handle so much more biomass. But it did.

“The epiphany was that biomass throughput for a pyrolysis reactor was limited by our ability to get heat through the walls of the reactor,” Brown said. “By burning the biomass internally to generate the energy needed to drive pyrolysis, we eliminated the heat transfer bottleneck, allowing us to open up the throttle, so to speak, on our reactor.”

Understanding and modeling

Iowa State engineers know their autothermal process works. But they’re still not sure exactly how.

Brown thought carbon monoxide and methane known to exit a conventional pyrolyzer might be burning during autothermal pyrolysis. Iowa State graduate student Chad Peterson proved him wrong using a simple computer model that demonstrated pyrolysis temperatures are too low to ignite these gases.

A new research grant should help find some answers.

The U.S. Department of Energy recently announced it has awarded Iowa State engineers a two-year, $854,039 grant to study autothermal pyrolysis and develop software tools to help design other kinds of autothermal processes. The grant from the department’s Advanced Manufacturing Office is part of $35 million awarded to 24 research projects across the country. Final details of the Iowa State project are being negotiated.

Alberto Passalacqua, an Iowa State assistant professor of mechanical engineering, will lead the Iowa State project.

“First we want to figure the chemical reactions and mechanisms that make autothermal pyrolysis work,” said Passalacqua. “Then we want to develop models of the process and compare them to experiments. The final goal is to develop simplified design tools to design bigger reactors.”

Scaling up biorefineries

This isn’t the first time Iowa State researchers have been involved with an Energy Department grant related to autothermal pyrolysis. In December 2016, the department awarded a five-year, $70 million grant that helped launch the Rapid Advancement in Process Intensification Deployment Institute, known as RAPID.

The American Institute of Chemical Engineers in New York City leads the RAPID Institute. Iowa State’s role is to manage the institute’s biorefinery efforts, including demonstrations of autothermal pyrolysis with the university’s commercialization partner, Easy Energy Systems.

 “What we have achieved is process intensification – multi-fold increases in biomass throughput for a given size reactor – while preserving oil yield,” Brown said.

Passalacqua, who has expertise in multiphase flows and computational fluid dynamics, said he’s hoping to develop design tools that will help manufacturers maintain that intensification at larger scales.

“We want to help develop designs for production plants,” he said. “We want to study and understand what happens in large-scale production.”

The Iowa State engineers expect their design tools will be added to an open-source toolbox that is freely available to use. That could help reduce the risk of scaling up the technology for commercial use. And it could help apply the autothermal principle to other chemical processes.

As plans move ahead to build two autothermal demonstration plants capable of processing 50 tons of biomass per day, Brown said it would be useful “to have a model that predicts the performance of these big reactors.”

The engineers think the reactors’ performance could ultimately do a lot for the bioeconomy’s bottom line – a research summary for the latest grant says the jump in biomass feed rates made possible by autothermal pyrolysis could reduce the estimated cost of producing fuel from $3.27 per gallon to $2.58 per gallon.

By RCDEA